|
|
|
PASS-THROUGH WASHING MACHINE FOR BOX-PALLETS WITH BLOW-OFF ZONE, 25 pcs./h, 2275512524
|
|

The machine is pass-through tunnel machine and is designed to wash box pallets with dimensions 1200х800х760/870 mm. The box pallet is placed laying on its side on lifting table. It lifts and an automatic driven pusher pushes the box pallet on the input conveyor. Cyclic transport system moves the box pallet in the pre-washing zone where fixed nozzles wash it from the outside and one rotating nozzle washes it inside. After the spraying pneumatic cylinders tilt the box pallet so the remaining water fall off. The washing process is performed in a similar manner. All processes are performed with hot water (45-60°С), which is provided by the customer. Тhe tank for main washing is equipped with heat exchanger. It is used to keep the temperature of the washing solution in case when the incoming water is cold. The rinsing is performed with hot water and after it pneumatic cylinders tilt the box pallet again, so the remaining water fall off. After the rinsing the box pallets gets into the disinfection zone, where it is sprayed with water 90°С. The heating from 60 to 90°С is performed by a heat exchanger and an electrical in-line heater. The blow-off is performed by high pressure centrifugal blowers and nozzles - air knives, which blow off the water of the products from all sides. After the blow-off process the box pallet falls on lifting table, which brings it to height 400 mm from the floor. The control panel is mounted on the left side of the machine, the electrical panel is separated. Two ventilation systems take the steams out. Safety switches are mounted on the side covers, so the machine stops automatically when they are opened. The machine is made of stainless steel 1.4301 (AISI 304) and complies with the Council Directives 2006/42/ЕС and 2006/95/EC, and USDA regulations.
|
| Technical data: |
| Max. capacity |
25 pcs./h |
| Аrt. numbers |
2275512524 |
| Dimensions of the product Box-pallet |
1200х800х760/870 mm |
| Power supply |
400 V/3 Ph/50 Hz
|
| Control voltage |
24 V DC
|
| Installed power |
58 kW kW
|
| Heating disinfection zone |
2x9 kW |
| Drive |
2x0,55 kW |
Blowers blow-off
|
2х7,5 kW |
| Blowers ventilation |
2х0,37 kW |
| Pumps |
2х11 kW/60 m³/h/5 bar |
| Hot water inlet |
min. 3 bar |
| Water outlet |
2хDN50 |

|
| Dimensions: |
| Length |
18750 mm |
| Width |
2235 mm
|
| Height |
2745 mm
|
|
|